Utilization and Maintenance of Ore Grizzly Feeder

Vibrating grizzly feeder mainly adopts a pair of motors as the vibration source, which has the completely same performance and parameters. When these two vibration motors rotate reversely at the same angular speed, the inertia forces produced by their eccentric blocks will overlap or counteract each other at a special phase. Thus, a huge resultant vibration exciting force will be generated so that the machine body will be forced to vibrate on the bearing spring. But do you know how to maintain the ore vibratory feeder machine?Vibratory feeder can be used in various industries such as metallurgy, mine, coal and chemistry and Fote machinery vibratory feeder has reliable performance, simple installation and good sealing, thus avoiding dust and reducing pollution. This vibration is used as the power to make the material slide on the material chute and drop so that the material moves forward continuously. As a result, material feeding purpose is realized. When the material passes the screen bars of the chute body, smaller pieces of material will drop from the gaps between the screen bars and not enter the next breaking procedure. In this way, material screening result is achieved. YK Series ore Vibratory Feeder is with a stable vibration , reliable operation and long service life , broken machinery continuous, uniform unfinished , and materials for coarse screening is widely used in crushing and screening equipment , mineral processing, building materials , metallurgy , silicate and chemical industry, water conservancy and hydropower , mining industry , and can be transported to the bucket elevators , crushers, shredders, and belt conveyors and other screening feeding device , as well as for automatic batching and quantitative packing , and the available automatic control processes , automation of production processes .The maintenance work of vibrating grizzly feeder is as follows: Inclined vibrating screen should be started with empty load. Material is loaded after the...