Attention Is Needed During Operation Process of Ball Mills

Many grinding machines have to be updated to improve product fineness, so we used to adopt new technology in it. In order to improve the ball mill’s productivity, they increase filling amount in the grinding body, iron ore crushing plant so as to occupy ball mill motor margin capacity. If the working current of the ball mill exceeds the rated current, lines of the original electrical burning will occur frequently. If in a serious case, the motor also need to be burned. Here, we will introduce some matter that should be noted in the early period when using of ball mill.
ball mill
1. Frequently check the oil (water) level of lubricating oil, hydraulic oil, coolant, brake fluid and fuel, and pay attention to check the tightness of the whole body. At the same time, strengthen the lubrication of lubrication points; it is recommended that in the run-in period, each class should fill grease for lubrication points expect the particular request.
2. Keep the machine clean, timely transfer and tighten loose parts to prevent aggravating the wear of machine parts.
3. When the run-in period reposes, take care of the machine and do a good job of checking and adjustment, wet grinding ball mill while paying attention to the exchange of oil.
4. Since the mill is particularly vehicles, the operating staff should accept training by manufacturers to fully understand the structure of the machine. Before operating the machine, they must first browser protection manual, operating machine according to manual request.
5. Note the work load during run-in period; it generally does not exceed 80% of the rated working load to prevent overheating generation.
6. Frequently observe each instrument, if abnormal, diamond mining machines stop machine in time to eliminate the fault.