Series of Crusher Operation Sequence for Function Well

As a professional sand vendors, Henan Hongxing would has responsibility and obligation for spreading the knowledge about the mining industry. According to the actual situation, customers can choose the suitable Vertical Shaft Impact Crusher or jaw crusher and operate the machine to ensure efficiency and quality of the production. At the same time, Vertical Shaft Impact Crusher customers also should investigate the manufacturers. We can choose the manufacturers which have some strength and advanced Vertical Shaft Impact Crusher equipment as far as possible.

For increasing the service time of crusher, it is necessary to learn some skills of operational maintenance, so as to accomplish the combination of use and maintenance. There are some methods of maintenance for crusher as follows:

The first is the preparation work before driving.

●To check jaw plate, bearings, draw bar, supporting plate, spring and triangle belt are in good condition; fasteners are firm; Protective devices are complete; there is no barrier around the moving parts and so on.

●To check the bearings has refueled.

●To ensure no materials are in the crushing chamber before opening the crusher.

The start-up sequence is in turn dust collector, crusher, discharging belt conveyor，charging belt conveyor, vibrating feeder and so on.

agitation vat: http://www.china-hxjq.com/n267.html
circumgyrate cement kiln: http://www.china-hxjq.com/n279.html


●To adjust the feeding quantity of vibrating feeder, and increase from small materials to big materials, it is usually controlled the height of materials is 4/5 of the jaw chamber height. In addition, it should be also noticed that the largest particle size of materials is no more than 4/5 of the feed opening width. What’s more, when the feed particle size is continuous and uniform, the crusher can brings into play its optimal efficiency.

●To check the bearings has refueled.

●To ensure no materials are in the crushing chamber before...