Words of Wisdom:

"Your life is meaningless unless you have meaning to life." - Yh73090

Presswood Pallet Machine Manufacturing Process

  • Date Submitted: 04/24/2016 10:20 PM
  • Flesch-Kincaid Score: 53 
  • Words: 413
  • Essay Grade: no grades
  • Report this Essay
Let’s take a look at what goes into the manufacturing of wood pallets. Because wood pallets are such a common sight at every imaginable shipping destination, they may seem as if they are knocked together with spare bits of lumber. But Presswood Pallet Making Machine manufacturing process is sophisticated and precise.

First the wood needs to be cut.When crushing, the disc and the chipping blades welded on the disc rotating fast together. Then the wood materials is transmitted to the chipping place by the transmission device. The wood materials encounter the rotating chipping blades and is cut into wood chips. As the wood materials get shorter, the transmission device will transmit them to the same chipping place. Finally, the wood chips with flat incision, even length and uniform chip thickness are processed.

The the material cut well need to be dried with rotary drum dryer machine. When crushing, the disc and the chipping blades welded on the disc rotating fast together. Then the wood materials is transmitted to the chipping place by the transmission device. The wood materials encounter the rotating chipping blades and is cut into wood chips. As the wood materials get shorter, the transmission device will transmit them to the same chipping place. Finally, the wood chips with flat incision, even length and uniform chip thickness are processed.

After the above process, glue mixer machine is next. After measurement of raw materials enter from the inlet into the Glue Mixer Machine continuously. Under the action of feeding shovel, raw material along the circumferential direction accelerated motion,form a ring body,and gradually run to the sizing area.The glue is in a natural flow state along the tangential direction into the glue mixer machine, stirring under the stir claw,the glue mixed with the raw materials.As the raw material distributed radially with different line speed and there is a big speed difference, so friction between the raw material, to achieve...

Comments

Express your owns thoughts and ideas on this essay by writing a grade and/or critique.

  1. No comments