Stirring Tank Is Indispensable in Mining

The stirring tank is mainly composed of the following parts: The mixing tank, it is a container which is used to hold the stirring slurry. The spindle component, which is a rotating vertical axis with stirrer (stirring round). The motor and the transmission device, its transmission way has belt transmission and gearbox transmission. The auxiliary component, such as support beam, feeding pipe, discharging pipe, loop tube, the baffle on the slurry wall, and so on.
    For the no-load test, it is necessary to inject water to the tank about two-thirds of the hight before starting the motor; while for the load operation, the current load should not exceed 85% of the rated current motor. It is necessary to inject the oil to the upper and lower bearing with oil cup or oil gun per three months. It is necessary to slightly adjust the bolt on the upper cover of the bearing, keeping that the bearing clearance will not be too large per half year. Pay attention to check if there are loose bolts, if the bearings are damaged, as well as if there is any necessary to tighten the bolt and replace the bearings in time. It is strictly forbidden for the empty running of the stirring tank.
    Finally, we should know that the stirring tank is indispensable equipment in the flotation separating process, and according to different application, it can be divided into the slurry stirring tank, stirred tank, lifting stirring tank, and medicine stirring tank. The stirring tank can be used in many fields like mining industry and so on.

Original link: http://www.china-crusher.com/news215.htm