Dry Mining Equipment Is Configured for Classification

 
 
DRY mining   PROCESSING PLANTS
 
Dry Processing Plants are supplied in fourteen models, with processing capacities of 50 tons/ hour up to 450 tons /hour of dry ore, per single plant.
Dry mining equipment   and machinery (Dry Minerals Processing Plants) are designed and configured for classification, concentration, separation and recovery of metals and minerals concentrate in dry mode and without the use of water.
Dry processing has many advantages over wet processing except when water is actually required prior to concentration and separation. Dry mining / Dry Processing Plants are designed and configured for concentration, separation & recovery of diamonds, colour gemstones, gold, other precious metals, base metals, ferrous metals, light metals and other heavy minerals, either from placer (Alluvial) deposits, or primary (hard rock) applications.
Dry mining equipment and machinery (Dry Processing Plants) are supplied either as portable/ Mobile or semi-stationary plants. The ore feeding is accomplished by earth moving equipment ( i.e. excavator or Loader), directly into the hopper of the Dry Trommel Component of the Alluvial processing plant, or continuously by conveyor from the crushing plant   to the Dry Screener of the Hard Rock Dry Processing Plants.
Dry mining equipment and machinery (Dry Processing Plants) are supplied in two different range of Alluvial Processing Plant, configured for Dry Processing of placer /Alluvial deposits, or the Hard Rock Processing Plant, configured for Dry processing of primary deposits/hard rock. In the event of placer (alluvial) deposits, the Alluvial Processing Plant is installed as is. In the event of primary deposits, the Dry Trommel is removed and the Hard Rock module is installed, after the rock reduction (Crushing/Screening/Grinding) Plant. The crushed ore is fed into the Hard Rock screener module, directly by the conveyor system.