Words of Wisdom:

"success is a ladder that can not be climbed with your hands in your pocket" - IMDave357

Sand Maker Machine and Crusher

  • Date Submitted: 01/08/2014 07:53 PM
  • Flesch-Kincaid Score: 26 
  • Words: 335
  • Essay Grade: no grades
  • Report this Essay
As for the third generation of sand maker manufactured by Machinery, its investment is 35%-50% lower than that of the same-sized traditional technical equipment and the production efficiency is 35%-50% higher. Artificial Sand Making Machine For example, the particles whose granularity is smaller than 5mm account for over 90% of the final products when making sand with limestone and account for over 80% of the final products when making sand with river cobble. In addition, its maintenance cost for long time of operation is 35%-50% lower, so that it is widely used in many industries such as artificial sand and stone, cement, refractory and metallurgy.The materials go into the crusher from the feed hopper and are separated into two parts by the distributor. One part goes into the impeller rotating with high speed from the middle of the distributor, and is quickened inside the impeller, Barite Mineral Grinding Machine and the acceleration can reach hundred times of the acceleration of gravity, and then the materials will cast from the three uniformly distributed runners of the impeller at a speed of 60-70m/s, and impact and crush with the other part of materials which fall from around the distributor and then they will together impact to the material lining inside the vortex cavity. Bounced from the material lining, the materials will impact obliquely upward to the top of the whirling motion chamber which will change their movement direction again, so that materials will move down, and the materials launching from the runners of the impeller will form a continuous material curtain. In this way, raymond mill manufacturers in india the materials will get two times or more hitting, friction, grinding and crushing effect inside the whirling motion crushing chamber. The crushed materials will be discharged from the bottom discharging mouth. This process will form a closed-circuit system together with the cyclic screening system and generally speaking, after three times of...

Comments

Express your owns thoughts and ideas on this essay by writing a grade and/or critique.

  1. No comments