Words of Wisdom:

"evErYday deals about haVinG an eXperiEnCe, may leAds to an Unperfect obedienCe!!!datz lyf! " - Nntien

Fly Ash Drying Wet Grinding Process Advantages Row

  • Date Submitted: 01/20/2014 12:32 AM
  • Flesch-Kincaid Score: 29 
  • Words: 470
  • Essay Grade: no grades
  • Report this Essay
 Large demand for cement fly ash comprehensive utilization of fly ash caused from past embankment , fill , concrete admixtures , soil and other aspects of the transformation , to the current in the cement raw materials , cement admixture , large water conservancy project , pumping concrete , mass concrete products, fillers and other high-class senior utilization . Fly into the plant due to excessive moisture , is not conducive to grind , you must first feed mill before drying dehydration . Therefore , fly ash dryer comprehensive utilization of fly ash produced to provide good prospects for development.
 http://www.vipeak.com/en/
 http://www.rollersmill.com
 
    Fly ash drying process is one of many well-known , you the user are also very familiar with the continuous optimization of industrial policy , increasingly stringent environmental regulations , and properly handle the wet fly ash has been put on the agenda . The wet fly ash at a reasonable energy consumption, simple process for drying , so to meet the requirements of fly ash in the water less than 2% , it can turn waste into treasure , and bring social and economic benefits purposes. vipeak Heavy mineral processing equipment for the drum dryer drying equipment , dedicated to the fly ash , gypsum , slag and other drying powder . Meanwhile vipeak series crusher , mill, Raymond mill, ball mill and other equipment can be crushing , grinding a variety of mineral ores.
    Now let's look at a few advantages of fly ash drying wet row sorting :
 1, the outlet temperature is low , long time dust removal equipment ;
 2 , self-cylinder insulation thermal efficiency up to 80% ( conventional single cylinder dryer thermal efficiency of only 35% ) to improve the thermal efficiency of 45% ;
 3, can easily control the final moisture indicators needed according to user requirements ;
 4 , to ensure that the material below 0.5% final moisture , fly ash and slag powder production line first product ;
 5 , single...

Comments

Express your owns thoughts and ideas on this essay by writing a grade and/or critique.

  1. No comments