Words of Wisdom:

"Alas life has become clear, up with the glass, down with the beer" - Albert

The Attentions for Ceramic Ball Mill

  • Date Submitted: 07/21/2014 07:14 PM
  • Flesch-Kincaid Score: 48 
  • Words: 410
  • Essay Grade: no grades
  • Report this Essay
Ceramic ball mill is mainly designed to mix, and mill materials. With less energy, it produce high fineness product. It has two types, wet mills and dry mills. According to product requirement to satisfy different customer’s requirement, the machine could use different lining board products. The milling fineness depends on the milling time. The motor is started by the coupling which can reduce voltage and lower the starting electricity. The structure is divided into integral type and freestanding type. Ceramic Ball Mill is mainly used for material mixing ,grinding ,uniform product fitness ,save power.As well as dry milling and wet milling.The machine can according to production need to adopt different kinds of lining board, to meet different needs. The Ceramic Ball Mill is the key equipment for grinding after the crush process, and it is widely used in the manufacture industries, such as cement, silicate, new building material, refractory material, fertilizer, ferrous metal, nonferrous metal and glass ceramics, it also can be used for the dry and wet grinding for all kinds of ores and other grind-able materials. Recently, in order to speed up the reconstruction, all sectors now has a higher requirements to the performance of large mechanical equipments used in the construction. Thus, the development of the mining equipment has gradually shifted to develop and research high tech crusher and grinding mill.Due to the action of gravity, the ores will drop and are gradually crushed under the impacting and grinding effect and the crushed ores will be discharged out of the cylinder through the discharging part. The discharged ores are classified by the spiral classifier, and the coarse sand will go back to ball mill from the joint feeding machine to be ground again. Ceramic ball mill body inlaid cylinder liner wear, has good abrasion resistance. Material from the feed device evenly into the mill first position into the compound empty-axis spiral, the warehouse has ladder...

Comments

Express your owns thoughts and ideas on this essay by writing a grade and/or critique.

  1. No comments