Words of Wisdom:

"What did the 5 fingers say to the face?.........SLAP! - Dave Chappelle" - Dhayyati@yahoo.com

Main Refining Process of Cottonseed Oil Refining Machine

  • Date Submitted: 04/17/2015 02:06 AM
  • Flesch-Kincaid Score: 51.5 
  • Words: 722
  • Essay Grade: no grades
  • Report this Essay
Wintone Machinery adopts the most advanced CE and ISO9001 approval continuous cottonseed oil refining process line to get high purity and high oil yield refined cottonseed oil. Available with both physical and chemical refinery technology, we are able to provide customers the most affordable cottonseed oil refining machines including design, manufacturing, installation with guaranteed quality and reliable service.

Main Refining Process of Cottonseed Oil Refining Machine:
(1).P-acid degumming operation of Cottonseed Oil Refining Machine
Drawing the filtered or settled crude oil into the neutral pot, control oil te-
mperature 40 ° C, liquid level cover the neutral pot volume about 80 %.Add
into the neutral pot P-acid with 85% concentration, 0.1-0.2% oil weight.Start
up neutral pot, make main shalf stirring at 60-70 r/min, finish de-gumming
in 30 min.
(2)alkali de-acid operation of cotton Cottonseed Oil Refining Machine
After finish de-gumming process, at once add into lye carrying alkali refini-
ng de-acid, lye concentration 16 ° Be ′, super alkali is 0.1-0.3% oil weight, afterfinish adding, continuous stirring 30min, when soap particles accumulated condensing, should reduce stirring speed, 30r/min avoid emulsion.
After adding alkali, gradually rising temp to the end temp   65 ° C, see to th-
at the rising temp speed should control at 1 degree per minute, not too fast.
Shut off neutral pot drive part, the oil settled in the pot 6-8 hours, make oil separate from soap.
(3)Water rinse operation of cottonseed oil refining machine
Adjust the neutral pot oil temp to about 85 ° C, add into hot water whose temp higher oil temp 10-15° C, the water use amount each time is 10-15% oil weight.Start neutral pot drive part, make the main shalf stirring washing at 30r/m-in, make the oil and water fully contact, stirring time 5-10 min.If oil/soap separate not ideal, the oil contains relative high left soap, the first time washing, better to use thin salt water...

Comments

Express your owns thoughts and ideas on this essay by writing a grade and/or critique.

  1. No comments