Words of Wisdom:

"You would not be able to get a love unless u had loves in your heart" - KokDahkJe3

Detailed Analysis of Technology of Teeth Roll Crusher

  • Date Submitted: 12/24/2012 12:24 AM
  • Flesch-Kincaid Score: 60.2 
  • Words: 393
  • Essay Grade: no grades
  • Report this Essay
 
1. An efficient rack welding structure of teeth roll crusher is assemble platform of screw propeller bodies, the grinding mechanism, the drive apparatus, and other parts.
2.The driving device of propeller mechanism achieves the movement of the worm, and two adjacent worm makes opposite rotation.
3. Efficient teeth roll crusher spiral propulsion is driven by the motor, reducer and several worm rotational movement, when the mineral aggregate enters that part to meet the size requirements of the mineral aggregate first by the gap between the worm, which does not meet the size requirements of chunk of ore material, and then enter the crushing chamber. The part of the structure has a screening and role in advancing the mineral aggregate into the crushing chamber.
4. Efficient teeth roll crusher chassis welded structure and internal assembly broken institutions provide support for propeller and broken bodies.
5. Liner is mounted on the chassis front wall of the chunk of mineral aggregate pre-broken jaw.
6. Small teeth roll with the big teeth roller shaft opposite, non-uniform motion, to achieve the  the shear and tensile broken of mineral aggregate.
7. Big gear roll axis is crushed by jaw mineral aggregate pre-broken, and then enter two broken teeth roll area to meet the size requirements of the mineral aggregate to leave out from the gap between the two broken roller tooth, "two" screening large blocks of mineral aggregate in the two-tooth roller tooth are asked to be clamped by the shear and tensile, and then is further broken by strong row. 
8. Efficient toothed roll crusher ring gear is mounted on the roller shaft, each of the teeth ring contains a number of crushing teeth, the sets of teeth and the teeth can be replaced.
9. The jaw structure consists of a four-bar linkage, connecting on a big tooth roller shaft and rack. Chunk of mineral aggregate enter the crushing chamber, the first to be squeezed between the jaw and the liner...

Comments

Express your owns thoughts and ideas on this essay by writing a grade and/or critique.

  1. No comments