Jaw Crusher Installation

With the improving of technology, our national economy gets a rapid development. This achievement is based on the support of mineral equipment, especially jaw crusher which is widely applied to conduct coarse and medium crushing to materials whose compressive strength is less than 320MPa in mining, construction materials, chemical and metallurgy industries.

Because jaw crusher is a large scaled machine designed to crush hard rocks, it is inevitable to be abrased. The abrasion or consumption will shorten its service life and bring great trouble to its production.

Jaw crusher installation:

1 , Due to the work of the vibration jaw crusher larger machines should be installed in the concrete foundation , in order to reduce vibration, noise and impact on the basis of nearby buildings , in the middle of the crusher and concrete foundation pad hardwood pallets, rubber tape or other cushioning material . And the jaw crusher needs to be installed in the local shelter , can not open place .

2, The motor must be installed in the rear of the jaw crusher , the direction of rotation must be done according to the requirements , may not reverse .

3, The machine should be firmly set in the concrete floor , foundation laying of discharge slots set aside a metal plate , and the slope of the discharge chute or else less than 50 degrees , to avoid obstructing the smooth discharge of the crushed product .

4 , The nesting population size should be required to adjust the particle size . When adjusted , you should loosen the T- bolts and tension springs. Use a bolt from the top to adjust the seat to open the top , insert, or removing the appropriate thickness of the gasket, and then returned from the top bolt , adjust the seat under the weight of the role of the movable jaw , ear close to the seat frame , while the pressure Gaskets rope together.

CZS cone crusher : http://www.greatwallcrushers.com/product/CZS-Cone-Crusher.html

cone crusher :...