Capacity Problems on the Ball Mill Ball

Capacity problems on the ball mill ball
    The hammer crusher in everyday use, dust constantly influence the productivity of the crusher, the following to see there are some problems: 1) in order to reduce the dust caused by the crusher shell air leakage, actual production, when the material is dry and often at the entrance to the crusher watering, the results exacerbate the baghouse filter bags paste bag sand making machine price and feeder blockage.2) belt conveyor material in a fall, the air and the material went into a closed dust mask, dust-laden gas through the cover wall cracks and openings to the hood spread, polluting the environment.In addition, due to the belt-corner dust points cone crusher are set crusher machine incorrectly, the precipitator is whether the open and stop on the lower belt conveyor drop dust has almost no effect.

  Therefore, crusher run, the dust collector is not running, the lower belt conveyor has been in the dust diffuse.3) the dust into the dust collector pipe inlet at the elbow so that the system resistance increases, elbow parts susceptible to dust wear and clogging.The round screw conveyor and sub-grid transport   alicey599 bag filter to trap the dust down, power consumption increases, mechanical maintenance workload increase; often need to be demolished grid round under the feeder, over time, under the feeder flange air leakage exacerbate air leakage ash bucket.4) When the broken material moisture (rain or materials tricking), into the dust of dust particles stone crushers than the broken dry materials, rough, the baghouse easy to paste bag, under the feeder is easy to plug, resulting in a dust Jaw Crusher bag control ventilation resistance is substantially increased, decreased ventilation capacity, severe dust.5) Since the baghouse is intermittent cleaning when the normal working hours of the precipitator grid round Leakage also can not be ignored.Baghouse filter area selection is too small, insufficient amount of the...