Words of Wisdom:

"This site rocks my socks" - Salmon1991

Palm Oil Extraction Process and Palm Kernel Oil Extraction Process Introduction

  • Date Submitted: 08/26/2014 12:17 AM
  • Flesch-Kincaid Score: 88.9 
  • Words: 262
  • Essay Grade: no grades
  • Report this Essay
Palm Oil is not the palm kernel oil. We should make clear the two kind oil extraction process. In the follow text is palm oil extraction and palm kernel oil extraction process introduction.

Palm Kernel Oil Extraction Process
1.Clean ripe palm fruit with water or steam.
2.Pull the fruit apart and remove nut or kernel. Each fruit will have one kernel.
3.Place the palm fruit in the hand mortar and crush to a pulp.
4.Boil the pulp for 30 minutes. This serves to remove extra water from the pulp fibers.
5.Line the funnel with cheese cloth. Place the spout end of the funnel inside the jar. Pour the pulp. Tightly seal the jar.

1.Clean dried kernels with water. Make sure they are free of any dirt or gravel
2.Shell kernels with a nut cracker. Separate the shells from the kernels.

3.Heat the nuts in the oven at 350 degrees until roasted. Grind in a blender or pound with a hand mortar until it is a pasty consistency.

4.Mix the paste with water heated to a boil in a bowl. Boiling water separates the oil from the palm paste. The oil will float to the top. Let the water and paste cool to room temperature.

5.Skim the palm oil off the top of the cooled water with the spoon. Pour the oil in the jar and close tightly.

Any problems about palm oil extraction process, please feel free to contact us without hesitation.


Express your owns thoughts and ideas on this essay by writing a grade and/or critique.

  1. No comments